1.The straight-line distance between data centers that serve as backups for each other should not be less than 30 kilometers. 2.Data centers that back up each other should not be powered by the same 220 (or 110) kV substation. 3.The location of the data center should also meet the following requirem... read more
The installation method of wire mesh cable tray is flexible and diverse, and the design and change of wiring route can be realized by horizontal right Angle bend, three-way, four-way, inner bend, outer bend and inner bend continuous bend according to the actual situation in the field. Just use the p... read more
The safe working load (SWL) capacity of wire mesh cable trays should meet the requirements in the table below. 1.Under the action of safe working load (SWL), the actual mid-span deviation of each span should not exceed 1/100 of the span; the actual lateral deviation of each span should... read more
1.COUPLER KIT The coupler kit is very versatile and can be used in many places. It is also a common one used in docking installation. It is mainly used for the docking installation of cable tray with a width of less than 300. First fix it between two steel wires with a spacing of 25 on both sides of... read more
1.Ceiling installation The cable tray is installed with Ω Bracket. The center distance of the screw is the cable tray width + 50mm (for example, for a W400mm cable tray, the center distance of the cross arm screw is 450mm); Ω Bracket are fixed on the floor with 2PCS M8×55 heavy-duty expansions, and ... read more
86-15888037338
District A,Huangjiabu Industrial zone,
Yuyao City,Zhejiang Province,China.
Home