Overview of all steel anti-static floors with sides and edges

1. Floor material

The floor is an all-steel component, the bottom side is made of deep-grade drawing steel, the surface is made of hard steel, and the upper and lower steel plates are stamped. The surface is treated by electrostatic spraying after phosphating, the inner cavity is filled with 425# Portland cement, the surface is pasted with HPL/PVC/ ceramic surface, and the edge of the steel anti-static floor is inlaid around the electrostatic conductive edge strip, which is a commonly used product. There is no electrostatic conductive edge around the boundless steel anti-static floor, which belongs to the high-end products.

2. Floor structure composition

The structure of the steel anti-static floor with edge and edge: like other kinds of anti-static floor, it is composed of three parts: floor, support and beam. The brackets and beams are joined by screws to form a stable lower support system, and the floor is set into the grid enclosed by the beams.

3. Floor accessories

The beam is made of high quality pipe steel, no welds around, and the whole is galvanized anti-corrosion treatment. Thickness 1.0mm. The upper and lower support of the bracket are stamped by a mold, and the casing is made of seamless steel pipe, and the whole is galvanized anti-corrosion treatment. The thickness of the upper bracket is 3mm, the thickness of the lower bracket is 2mm, and the height is adjustable.