Basic requirements for cabinet side doors and cabinet doors

Side door of the cabinet

1.After installation, it is smooth without any protruding parts, no light-transmitting gaps, and has a reinforcing crossbeam to prevent depression and deformation.

2. After the door panel is installed on the cabinet, there should be no visible tilt, depression, protrusion or local distortion or twisting.

Front and rear mesh doors of the cabinet

1. The transparent area is over 70%, and the mesh area is not prone to deformation. Permeability = Hole area/punching area ≥70%; The punching area is greater than or equal to the area between the square hole strips.

2. There are shock-absorbing strips at the contact point between the door edge and the frame.

3. The rear mesh door is designed as a double door according to the on-site requirements.

4. The front and rear doors are installed without any tilting, depressions, protrusions or local distortions or twists.

Cabinet door lock

1.The door lock component opens and closes flexibly and is not easy to loosen. The handle is of appropriate size and provides a comfortable grip.

2. The rear door lock adopts a double door and top and bottom pin control type to prevent the door frame from deforming.