Advantages and usage steps of aluminum alloy wire fixers

Aluminum alloy cable solidifiers can conveniently layer and group various types of cables, ensuring that the cables do not cross, distributing the heavy pressure they bear, providing better heat dissipation and eliminating fire hazards.

Aluminum alloy wire fixers need to be used in conjunction with bases of corresponding specifications. Different installation methods require different fixing screws. Each layer of the aluminum alloy wire fixer needs to be fixed with two male and female screws. The inner side of each wire fixer is attached with a sponge compression strip to prevent the wire from loosening. If the line is a bit thick and the clamping is too tight, you can also try tearing off the sponge pressure strip.

① Installation on aluminum alloy cable tray, required accessories:

1 base, 2 M6*14 flanged cross screws, 2 oval nuts

② Installation on the grid bridge frame, required accessories:

Base ×1 piece, grid pressing ×1 piece, M8 carriage screw ×2 pieces, M8 flange nut ×2 pieces

③ Installation on U-shaped steel cable trays, required accessories:

Base ×1 piece, M8 carriage screws ×2, M8 flange nuts ×2

④ Wall or floor installation, required accessories:

Base ×1 piece, M6 internal explosion ×2 pieces, M6*14 external hexagonal screw ×2 pieces